DEWETRON 3010
The DEWE-3010 is our most portable model - easily fits
under your seat on a commercial airplane, or in the overhead. It's the
data recorder of choice among our automotive and train manufacturers.
With an internal RACK that holds up to 8 plug-in signal conditioners,
and a National Instruments A/D card for 16 dynamic signal inputs (connect
an expansion RACK to access the other 8 inputs). Also available as a lower-cost
DEWE-3010-REC model with 16 built-in differential voltage inputs (no plug-in
signal conditioners required in that model). Like all of our PC instruments,
the DEWE-3010 runs any Windows software (Excel, LabVIEW...) as well as
our own DEWESoft turn-key recording/export/printing data acquisition package.
Main Features:
16 and 64 channel models
12.1" TFT screen
Standard 10/100 Ethernet, USB, big hard drive, floppy drive, CDROM, serial,
parallel, PS/2 ports...
Upgrade to CD-RW/DVD/both!
Accepts any combination of DAQ and PAD series plug-in signal conditioners
16-ch model: 200 kHz sampling
64-ch model: 1.25 MHz sampling
Includes keyboard/pointing device
Available PCI slot
DEWETRON 2010
This is the machine that started it all - the first completely
integrated portable PC Instrument from Dewetron! With an internal RACK
that holds up to 16 plug-in signal conditioners, and a National Instruments
A/D card for 16 dynamic signal inputs. This is a powerful computer-based
data recording system that is in use at hundreds of test sites all over
the world. Tough enough to run inside trains, military vehicles, helicopters,
aircraft, or right on your factory floor. Run any software you want, or
order DEWESoft, the complete package for channel setup, scaling, on-line
display, recording to disk, and easy export to multiple formats, as well
as full-color printing to any Windows compatible printer!
Main Features:
16 and 64 channel models
15.1" TFT screen
Standard 10/100 Ethernet, USB, big hard drive, floppy drive, CDROM, serial,
parallel, PS/2 ports...
Upgrade to CD-RW/DVD/both!
Accepts any combination of DAQ and PAD series plug-in signal conditioners
16-ch model: 200 kHz sampling
64-ch model: 1.25 MHz sampling
Includes keyboard/pointing device
Available PCI slot
DEWE-Modules
    
Dewetron makes a plug-in signal conditioner for virtually
every sensor and every signal! They plug into just about all of our systems,
including the DEWE-2010, DEWE-3010, DEWE-4000, DEWE-RACK, and DEWE-BOOK
series - and more. We have two basic series - the DAQ series for AC or
dynamic signals, and the PAD series for slow/static signals. For a complete
listing, download the brochure, or give us a call to discuss your requirements.
Main Features
- Single Channel Modules for dynamic signals
- Analog outputs (±5 Vf.s.)
- Selectable ranges*
- Selectable filters*
- 1000 Vrms isolation in most modules
- DAQP series also controllable via RS232
- Modules available for microvolts, volts, kilovolts
- Modules available for strain gages, accelerometers, LVDT's, RPM/tach
signals
Up to 64 DAQ modules per system
- Can be mixed freely with PAD series modules to create the ideal system
for your needs
PNA-3000
PNA-550
 
PNA Series Power Network Quality Analyzers from Dewetron combine the best
features of half a dozen power quality instruments into a single affordable
instrument. These are our two major powerhouses - encompassing all possible
PNA series features and capabilities in two rugged, highly portable machines.
- FFT Analyzer
- Energy Flow Meter
- Flicker meter
- Voltage Monitor
Power Quality Analyzer
Recorder
Vector Scope
Harmonic Analyzer (and interharmonics)
Oscilloscope
Flicker Meter
Transient Recorder
Control Signal Detection
Asymmetry Monitor
Alarm Module
Disturbance Detection (EN 50160)
Data Recorder (option)
Both the PNA-3010
and larger PNA-2010 accept our high-isolation plug-in signal conditioners,
allowing connectoin to a wide variety of inputs, allowing these machines
to monitor and record other parameters in addition to voltage and current.
Set up and monitor the system via the bright touchscreen display. Multiple
PNA's can be run in parallel - reporting faults and triggers back to a
central workstation via LAN, WAN, dial-up, or wireless modem. Or just
use a single PNA (any model) alone for the ultimate in power quality analysis.
Built on the same platform as our DEWE-2010 and DEWE-3010 data acquisition
systems, your investment in a PNA version will pay itself back faster
than you can imagine - because your PNA can serve "double duty"
as a general purpose data recorder! Hook up strain gages, accelerometers,
and more, to perform so many tests.
DEWE-FFT
 click
left button to DEWETRON
web site |
